In minutes...process one day's output of
an automatic screw machine
... in handling small work such as that produced
by Swiss type, Brown & Sharpe
Davenport screw machines.
... in handling parts ranging in size from
the very smallest produced to
those up to
½ inch in diameter and
1 inch long.
... in shops and departments with as few
as three and as many as 12 automatic
machines producing small parts.
Size range: from smallest parts to ½" (12mm)
dia. x 1" (25mm) long.
Maximum part sizes:
Maximum diameter - ¾" (19mm)
dia. x ¼" (6mm) long
Maximum length - 1/8" (3mm) dia. x 1
3/8" (35mm) long
Operating rate: 1½ cu. ft./hr average, 3 cu. ft/hr
|OPERATION... AS EASY AS A, B, C
A. With machine running, and after cutting
oil has been removed, empty production to
be separated into the work box.
B. Adjust air blast regulator lever to regulate
air flow for size and weight of the parts.
Too much air prevents efficient separation;
too little air prevents chips from separating
C. Feed the production from the work box through
the slot into the vibrator. By
means of constant
agitation, the vibrator spreads
evenly before it passes into
That's all. The chips are autmatically discharged
below the chip discharge hood,
clean parts drop from the parts
||Standard 1/3 H.P., 3450 RPM, single phase,
60 Hz, 115 volts, totally enclosed electric
motor. (Special motors available on request)
||Manual Starter, with current overload protection
|Air blower control
||27 air regulator settings, for accurate control
over complete blower range
| Connecting Rod
| Gear Reducer
| Vibrator Pan
||Self-aligning oilite bronze
||30"L x 20"H x 18"W (76 x 50
x 46 cm)
||186 lbs. (84kg)
|3 Cu. Ft./Hr.
< 1/2" Dia.
< 1" Long
|30 Cu. Ft./Hr.
1/16" to 3/4" Dia.
1/4" to 3-1/2" Long
|60 Cu. Ft./Hr.
1/8 to 2" Dia.
1/4" to 6" Long